I have been a member of the GTOUK club for a few years now. And from time to time submitted pieces of artwork I thought they would be interested in.
This year I was approached to look at a redesign of the membership card, wanting to make it special since the Mitsubishi GTO first roled off the production line 20years ago. I had already a few illustrations that I had done of my own car, but they wanted a standard looking car for the car, so a few hours later a standard spoiler and wheels were introduced and the design approved.
You can see what the club is all about here: GTOUK
And here's the final layout:
'Red Ring of Death' - Microsofts free gift to you for hard earned cash!!!
There I was happily blasting my friends on 'Modern Warfare 2' when the screen freezes, no problem I thought a quick power-off and I'll be back in the game. To my horror what I saw when I turned my beloved 360 back on was 3 blinking red lights, a quick 'google' had me pulling the rest of my hair out!! It turns out that due to poor cooling on the motherboard the processors for the graphics chip, cpu or both can get warped, therefore resulting in a system failure (3 red rings). The main culprat seems to be the 'X' clips on the back of the board holding the heat sinks in place. More reading and investigating I found a guy that suggested replacing the clips for a bolt on system. So with screwdriver in hand and 'NO WARRANTY' to fall back on, I proceeded to rip apart my xbox - I had nothing to lose and everything to gain if it worked.
Here's how I did it.....Oh please don't blame me if you try this and it don't work, so far I'm 3 for 3 units fixed using this method, however if you have a valid warranty I'd recommend you use that first.
Step 2 - Lets get the box apart - First Stand the box on its end and using your fingers pull at the top (front panel) it will with a liitle effort pop off.
Step 3 - Get yourself some tools (actually you should have got these first), the ones I found worked well are these from B&Q (DIY Store) Click here for link to store
You will need the T9 star, 2.0 slotted and 3.0 slotted screwdrivers. Also a 1/4 socket (you'll see why later)
Step 4 - Remove the grey grills from either end. Using the 2.0 slotted driver poke the end through the holes in the casing to release the clips, if you look closely the case is marked indicating where the clips are. Then just lift carefully.
Step 5 - Seperate the main case. Place the box upside down to do this (ignore the first lot of photo's as they just show where the locking points are). You'll need a thin blade, or something similar to release the internal clips. There are 7 in total (see image below)
With the box upside down, push the blade in a slight downward motion, you will feel and hear the clips release with a 'clicking' sound, then just move from one end to the other releasing the clips and pulling the case apart.
Step 6 - Now turn the box so you can see the front, there are a few clips here, just use the slotted driver to ease these apart.
Step 7 - There are 6 star bolts that need to be removed to seperate the internal metal case (these are marked with red circles), the blue circles show the fixing points of the motherboard and will need to be removed either now or later. Use the T9 star driver to remove all screws.
Step 8 - Turn the unit over and remove the last part of the outer case, exposing the motherboard etc. Take care when removing the case, as the CD/DVD open/close button will catch on it.
Step 9 - Remove the DVD drive on the left, remembering to disconnect it from the mother board, two cables to remove.
Step 11 - Disconnect the power to the twin fans.
Step 12 - Remove the remaining screws on the back of case, these are 8 back star screws. You can throw these away as you will not need these to re-assemble the unit.
Step 13 - Turn unit right way up, and remove the clip/housing that covers the ring lights, its just a clip. Then remove the 3 black star screws and pull the circuit board towards you and off the unit.
Step 14 - Remove the motherboard and place upside down, then using the slotted screwdriver lever the 'X' clips off each pin holding the heat sync on.
Step 15 - With both heat syncs off, carefully clean the top of the processors and the underneath of the heat syncs of the grey thermal paste. The first image shows a typical sight with thermal paste all over the place.
Step 16 - Remove the 8 pins from the heat sync's (4 on each). Then stick washers onto the heat sync, I used a small dot of superglue to hold the washer in place. The shallow one will need a stack of two washers (so that's 8) so it will clear some of the components on the motherboard. The larger copper bottomed only needs one in each corner.

Step 18 - Now carefully hold the motherboard on its side and line, one at a time, the heat syncs up and using the screws (shown earlier) screw the heat sync's onto the motherboard.
Step 19 - Here's where we test to see if all the hard work was worth it. All you need to do is plug in the power and monitor/TV cables, you'll also need to push back on the small circuit board (light ring board), with all in place use your finger nail to push the center button on the light ring board, if your lucky your screen will show the xbox logo and boot logo, you can turn the unit off using the same button. If however like 2 of the units I've fixed the 3 red lights still show, leave it plugged in, the heat sync's will get very hot so be careful, hopefully after a few minutes it will screen will show the boot logo, if not leave for 5mins, then turn off, and start the xbox again. This has worked for me!!

Once its working, just work backwards in assembling the unit, I tend to get it back as far as motherboard in case with fans connected and shroud inplace, then just turn it one and play for a few hours to test to make sure all is ok. Then when happy fully assemble and pat yourself on the back for not only fixing your dead xbox but also saving the overpriced fixing fee microsoft charge for a 30-45min job and a few pounds worth of parts.
Hope this tutorial helps you as much as this knowledge has helped me.
And it snowed!
Everyone in the UK will know that the past 5 days have brought mayhem to the county, it seems that we are just not set/prepared for snow. Schools closed, roads closed and not a gritter insight!
Since the weather extended the kids holiday by a week, it seemed ashame to not get out and enjoy the white stuff.
Here's some photo's/video of what we've been doing.
You will have noticed that I've been drawing my car, and messing about with graphics etc. So it's said that redheads have more fun, which I doubt, but I believe that they might just look a tad better than silver (but only as a drawing). To prove my point I changed the colour of my drawing, and the results speak for themselves.
Website UPDATED!!!!
For sometime now I've wanted to update my company website, but time constrants and family have meant that I've put it off for a few years now, but now that has al changed. With a slow year for work, I took the time to re-vamp and hopefully generate more business.
Below is a screen grab of the homepage, this site is built from scratch, with a few flash elements thrown in.
DesignWise Website
Photo's of your pride and joy are great, BUT sometimes nothing beats a really good illustrated image.
Below is an example of a Mitsubishi GTO Twin Turbo, drawn in CorelDraw X4. It took to good part of 24hrs to complete, and if I'm honest, still needs some work doing to it.
Click the image to view larger view!
Got no 'Charge'
Just recently, I've noticed that due to the lack of use my car has been getting, that the battery is not quite charged as it should be. There's nothing wrong with the battery, just that the alarm draws power from the battery and it drains over a few weeks of none use. So armed with 'google search' I set about looking for a solution to my problem, and the first thing I found I liked it alot.
My first link was to the Maplins website, here Maplin.co.uk and found this
It's a solar panel trickle charger. It comes with connectors to plug into your cigerette lighter socket, or clips to connect direct to battery. (The cigerette lighter option is the easiest, but only if your car's socket is not switchable live, mines switchable, so I'm going to have to run a new wire that's perminant live to it.)
The charger draws power from the sun or artifical light, and since England is cloudy (alot) it still works. So just plug it in when I get home, unplug when I won't to use the car and no more dead battery woes, and its meant to prolong the life of your battery.
Bored, so I drew this....
From time to time I just get bored at work, guess it helps being the boss!! Anyway I was surfing the net this morning and saw a really nice illustration of a Porsche GT, so I thought I can do that, so armed with a photo of my car, I set about creating an illustration based on my GTO.
Here is the result:
For those that don't know, the illustration is a vector graphic, these are scalable without loss of image/resolution, where as a bitmap can not. I was going to do it in Adobe Illustrator, but plumbed for CorelDraw instead. Now the image above is not finished, but gives a good idea of how the car looks.
1 day later a small update to the rear end....
Pimp my ride....

The summer has now come and gone, well almost, refreshing morning bike rides just before the day warms up have been on the cards these past few weeks.
My new training partner, Mark, has proved to be a worthy adversary. At the beginning of the summer Mark approached me and asked if I won't mind letting him join me when I went out on the bike, truth be known I'd been struggling to get the enthusiasm to get out, so this was what I needed to get back into the saddle. Mark is a 'Personal Trainer' and has his own gym, so I was somewhat nervous about how I would fair.
To start with we had to convert his bike from a full suspension lead weight to a hardtail ridged fork feather weight beasty! This no longer gave me the edge on my lightend bike. Lifting weights and cycling are completely different, so for the first month he struggled, but soon his own fitness caught up and our 12mile route soon turned into a mad speed fest, with us both having strong sections, and no real advantage over the other. Part of the course was a 3 mile sprint from Elmstead to Colchester along a duel carriage way, this was not an ideal stretch to be on, and I was always waiting for some truck not to see us and turn us into 'brown bread'!
Then a few weeks ago Mark asked if it was possible to lengthen the course, this was good news as I had an alternate route that I had used a few times, and was happy to get off the main road, as the new course cut the road out completely, and so the new 14.6mile course was born.
Below is a googlemap of the course:
(not sure why the route sometimes does not always show)
View It's only 14miles in a larger map
The new route adds another 2 miles of off road cycling, this is good, with some up and downhill sections to get the heart pumping. This also has increased our ride time by 15mins, which although does not sound like much, when your continually pushing on over rough terrain it really saps your strength.
First time out, I forgot the route and had to cut it short, second time out I remembered the route but got a puncture, which Mark took great advantage of. I never realized how much more effort it takes to ride on flat tyres!!! But the third time out was a charm, and I enjoyed every minute, bump, hill and speed sections.
Hopefully we will keep getting out as the weather turns colder and wetter. I know I certainly need to just to keep my body in shape. Did I mention Marks about 18years younger than me, which makes me feel a little better about myself.
See old people can still hang with the youngsters!!!!
One of the biggest issues I have with my car is it's width, being wider than a standard car is a pain in the neck when it comes to parking in public car parks. There just is not enough room for people to walk between the car without smacking the wing mirrors. So when I discovered that later versions of the GTO came with electric folding mirrors I kept an eye on a popular auction site to land me a cheap pair.
After parting with a few pennies I was in possession of a pair of black mirrors, which obviously is the wrong colour for my silver car, a quick dismantle of the mirrors, a couple of coats of silver paint and laquer I was ready to try to wire them into my existing electrical loom.
I decided not to wire them into the alarm/central locking, as if/when I ever wanted to lock the doors whilst driving the mirrors would fold. So it's wired to the ignition system.
And here's how I did it......(some of the photo's where taken from others as I forgot to photograph my progression)
First here's what you will need.
- 2x relays (maplins PN: N41AW: 5A DPDT 12VDC Relay)
- Approx 2mtrs of two core (speaker wire)
- Approx 2.5mtrs of single core (a mix would help to you know what is +live or -ground
- Multi-meter
- thin cable ties
- soldering iron
- Insulated crimp eyelets

- Insulated crimp terminals (bullet plugs & sockets)

- Insulated Butt Splices

- Snap lock connectors

Step 1 - Find the power!
You need to find two power sources, the 1st is permanant +12, this can be a splice off the doors light, use the multi-meter to find the +live. The 2nd is a switchable +12, I decided to get this off the electric window switch, once again use your multi-meter which one is live when the ignition is switched on. The -ground is easy, that can be off the metal work of the door.
Step 2 - Prep the relay
- Cut 2x 150mm lengths of single core wire for the permantant +12 (red)
- Cut 3x 150mm lengths of single core wire for -ground (black)
- Cut 1x 700mm length of single core for switchable +12 (blue)
- Cut 1x 1mtr length of two core for link from relay to mirror
I chose to solder these to the relay, but you could get some small spade connectors, or even use a holder/mount (PN: N36AW:8Pin Relay Skt DIN ) from Maplins.

Here's the order -
4 & 5 = +12v
1 & 8 = earth/ground
9 & 12 = wires to mirrors
14 = earth/ground
13 = switchable +12v
(if the mirror opperate the wrong way just switch 9 & 12)
Once soldered/connected to the relay do the following:
- join 4 & 5 together with the male end bullet connector
- join 1, 8 & 14 together with the eyelet crimp
This keeps it tidy and less wires to deal with.
Step 3 - Getting connected
Now it's time to connect all the wires and test the mirrors.
- Fix the ground wires (1, 8 & 14) to door (there's plenty of bolts to connect to, I used one just left of the door light connect block)
- Feed wire and secure the switchable +12 feed (13) along the existing wiring loom upto the window switch and use the 'snap lock connector' to splice into the switchable live.
- Run the two core wire (9 & 12)inside the door, I found that you can easily follow the existing wiring loom upto the mirrors, using cable ties to secure in place.
- Now assuming that your mirrors are not fixed in place the two core should be pushed through the hole in the door where the mirror is connected.
- Take a look at the connector block on the mirrors, you will notice there are 7 wires, where as the old only has 5. The two outside wires (in the picture below are Green (left) and Yellow (right), I used a small electrical screwdriver to pull them out of the connector block. These wores controll the folding motor, and it's these that you connect to the end of the two core wire you just threaded up through the door. Use the 'butt splices' to connect.
- Now lastly using a 'snap lock connector' connect a 60mm length of wire to the permanant live feed from the door light, on the end of this connect the female bullet connector. You can now connect the male end of the permant live (4 & 5) to this. If at this stage the mirrors either fold out or stay in the folded out position, you need to switch the wires (9 & 12) around.
- If in step 6 the mirrors are folded, turn on the ignition (you don't need to start the car) the mirrors should now fold out. If all works correctly you can fix the mirrors in place and secure the relay to the door. I used a cable tie to fix it to the wiring loom near the door light as there is plenty of room there.
- Repeat steps 1 - 7 for the other door!!






































